Posts

Alternative for Gas Cylinders

Gas cylinders in the laboratory or workshop involve risks. Think of gas cylinders that leak with the risk of explosion as a result. And, depending on the type of gas, could potentially cause asphyxiation. In addition, moving can sometimes be a difficult and dangerous undertaking. In fact, having high-pressure cylinder bottles near your employees is an undesirable situation. Finally, there are measures that must be taken to comply with the regulations for gas cylinders.

Fortunately, there is an alternative, namely gas generators. Advantages of this compared to gas bottles are:

  • No explosion hazard
  • Easy to move
  • They don’t run out and don’t need to be replaced
  • Consistent gas purity
  • Economically beneficial

A gas generator only supplies gas when your instrument asks for it. If your instrument is on standby or turned off, the generator will not generate any gas. In the situation that an instrument has to be moved, the generator can be moved more easily. So no hassle to re-install the piping.

Nothing is more annoying if you no longer have spare gas bottles when a gas bottle runs out. It can just happen that there are delivery problems or employees have forgotten to check the gas bottles, resulting in an empty gas bottle. A generator will not run out and will continue to generate gas and will not need to be disconnected.

Perhaps the most important reason for your analysis is consistent gas purity. A gas generator supplies a constant quality of gas, while the purity of gas from a bottle can differ per bottle. That is undesirable for your instrument and analysis results.

The price of gas cylinders is increasing every year. Gas is becoming more expensive and its supply costs are increasing.

Investing in a gas generator has a payback period of approximately 6 to 12 months. This of course depends on your situation.

Instrument Solutions represents Claind Gas Generators and Purifiers. With over 40 years of experience, their gas generators provide a safer and economical way to supply clean gases. Claind’s generators generate pure Hydrogen (H2), Nitrogen (N2) or pure air (O2) for GC, LC-MS, TOC and many other applications.

If you think that gas generators can replace your gas bottles, but you want to know what is possible for your specific situation, our specialists Sina Saidifar and Jan Volkers can advise you without obligation.

Silent compact Air Compressor AirComp200

Claind, Italian manufacturer of gas generators since 1979, has launched a new compact air compressor. It has the power of an industrial compressor, but made it suitable for the laboratory.

The compressor delivers 180 Nl/minute of ultra dry oil-free compressed air suitable for feeding all nitrogen generators. Also suitable for general use.

For the lab a low noise level is important and the AirComp 200 is therefore quiet (< 58 dB). For years Claind has identified the most important wishes of laboratory users and integrated these into the AirComp 200. This makes the AirComp 200 unique!

Lowest noise level in the market

A pleasantly compact, aesthetic compressor that can be placed under the lab table. Ideal for the laboratory.

The AirComp 200 has a high production capacity (180 Nl/minute at 8.5 bar). Depending on the desired flow, the speed is automatically controlled so that in most situations only a small part of the capacity is used. The effect of this is:

  • a low electricity consumption;
  • Reduced engine load resulting in longer compressor life;
  • that it is low-maintenance thanks to the variable speed and low temperature that is released.

A built-in membrane dryer provides ultra dry air (Outlet Dew Point -60°C).

Lastly, the AirComp 200 is remotely controllable from the PC or smartphone and Operating parameters can be monitored in real time.

 

Specifications
Flow Rate180Nl/min (210 l/min FAD) @ 7 bar
Technologies employedOil free SCROLL compressor with Universal Power Supply and Electronic Speed Control
Output pressure6 ÷ 9,5 bar
Air output characteristicsParticulate = 0,01 mmm, Moisture=  -60°C dew point ATP @ 9,5bar 50Nl/min
Electrical Supply230 Vac ± 10%, 50/60, Hz 2,5kW
Index of protectionIP20
Noise Minimum: 54 dBA    Medium: 58 dBA
Operating temperature5°C – 40°C
Environmental HumidityMax 90% without condensation
Max AltitudeTested up to 2000 m from the sea level
DimensionsHeight: 79,5cm, Width: 68cm,  Depth: 83cm, Weight: 148kg
Pneumatic ConnectionsPurified Air Output: G 1/2” female