ICP glassware

GlassExpansionlogolargeWe offer a wide selection of ICP Nebulizers and Spray Chambers from Glass Expansion. A number of examples can be found below. An overview by brand of ICP can be found in the Glass Expansion catalogue below.

Conikal Nebulizer The Industry Standard for ICP-OES

  • Material: Borosilicate glass
  • High physical reproducibility ~ 1%
  • TDS tolerance, typically up to 5%
  • Tolerance to particulates, typically up to 75μm
  • Low RSD’s due to highly accurate construction
  • Standard available uptake: 1 & 2mL/min

SeaSpray_NebulizerSeaSpray Nebulizer High Performance and Tolerance

  • Material: Borosilicate glass
  • High physical reproducibility ~ 1%
  • TDS tolerance, typically up to 20%
  • Tolerance to particulates, typically up to 75μm
  • Low RSD’s due to highly accurate construction
  • Standard available uptake: 2.0 and 0.4mL/min (1mL/min uptake available on request)

MicroMist_NebulizerMicroMist Nebulizers The Industry Standard for ICP-MS

  • Material: Borosilicate glass
  • High physical reproducibility ~ 1%
  • TDS tolerance, typically up to 15%
  • Low RSD’s due to highly accurate construction
  • Standard available uptake: 0.05, 0.1, 0.2, 0.4 & 0.6mL/min

Slurry_NebulizerSlurry Nebulizer Ideal for Wear Metals in Engine Oils

  • Material: Borosilicate glass
  • High physical reproducibility ~ 1%
  • TDS tolerance, typically ~ 1%
  • High tolerance to particulates, typically up to 150μm
  • Low RSD’s due to highly accurate construction
  • Slurry nebulizers have a natural liquid uptake of 4mL/min
    but operate best between 1.5 and 2.5mL/min

OpalMist Nebulizer Ideal for ICP-MS workOpalMist Nebulizer Ideal for ICP-MS work:

  • Material: PFA
  • High physical reproducibility ~ 3%
  • Strong and consistent self-aspiration
  • Tolerance to particulates, up to 75μm depending on uptake
  • TDS tolerance, typically up to 15%
  • Low RSD’s due to concentric geometry
  • Standard 6mm size fits standard cyclonic spray chambers. Adaptors are available for Scott type spray chambers
  • Standard available uptakes: 0.05, 0.1, 0.2, 0.4, 0.6 & 2mL/min

Tracey – Cyclonic, internal volume 50mL


Twister_Spray_Chamber

Twister– cyclonic with baffle, internal volume 50mL


Cinnabar_Spray_ChamberCinnabar – Small volume cyclonic, internal volume 20ml


Twinnabar_Spray_ChamberTwinnabar – Small volume cyclonic with baffle, internal volume 20mL


IsoMist_Programmable_Spray_ChamberIsoMist Programmable Temperature Spray Chamber

  • Programmable from -10 to 60°C in 1°C increments
  • Maintains temperature to within 0.1°C
  • Compact design (7.5x4x4 inches)
  • 100% self-contained (no external lines)
  • Incorporates Bluetooth® technology for clean
    wireless control (USB available)
  • Compatible with all ICP-OES and ICP-MS models

Contact Form

=

This post is also available in: Dutch