Tag Archive for: GC-MS

You are here: / GC-MS

Posts

10% inruilkorting op gasgeneratoren

/in /by

Ontvang 10% inruilkorting op een nieuwe gasgenerator!

Een betrouwbare analyse begint met een constante en zuivere gasvoorziening. Oudere gasgeneratoren functioneren vaak nog prima, maar leveren na verloop van tijd een lagere gaskwaliteit, vragen meer onderhoud en verbruiken meer energie dan de nieuwste generatie generatoren.

Daarom is dit hét moment om uw oude generator te vervangen. Profiteer nu van 10% inruilkorting, ongeacht het merk of de staat van uw huidige generator.

Wij bieden gasgeneratoren van Claind en die garanderen:
✔ Constante gaszuiverheid voor betrouwbare analyseresultaten
✔ Energiezuinige en stille werking
✔ Compact, ruimtebesparend ontwerp

✔ Stapelbare modules voor een complete gasvoorziening

Wij leveren generatoren voor onder andere:

  • Stikstof (N₂) – voor LC-MS, monstervoorbereiding en als draag- of make-upgas voor GC.
  • Waterstof (H₂) – als draaggas voor GC en voor detectoren zoals FID.
  • Zero Air – voor een zuivere vlam bij GC-FID-, TOC- en THA-analyses.
  • Complete GC-gasstations – combineer Waterstof, Stikstof en Zero Air in één compacte, stapelbare opstelling.

Wilt u weten welke generator het beste past bij uw laboratorium of wilt u een offerte ontvangen? Vul onderstaand formulier in en geef uw wensen/eisen aan.

Deze promotie is geldig tot en met 30 september 2026.

=

 

Alternative for Gas Cylinders

/in , /by

Gas cylinders in the laboratory or workshop involve risks. Think of gas cylinders that leak with the risk of explosion as a result. And, depending on the type of gas, could potentially cause asphyxiation. In addition, moving can sometimes be a difficult and dangerous undertaking. In fact, having high-pressure cylinder bottles near your employees is an undesirable situation. Finally, there are measures that must be taken to comply with the regulations for gas cylinders.

Fortunately, there is an alternative, namely gas generators. Advantages of this compared to gas bottles are:

  • No explosion hazard
  • Easy to move
  • They don’t run out and don’t need to be replaced
  • Consistent gas purity
  • Economically beneficial

A gas generator only supplies gas when your instrument asks for it. If your instrument is on standby or turned off, the generator will not generate any gas. In the situation that an instrument has to be moved, the generator can be moved more easily. So no hassle to re-install the piping.

Nothing is more annoying if you no longer have spare gas bottles when a gas bottle runs out. It can just happen that there are delivery problems or employees have forgotten to check the gas bottles, resulting in an empty gas bottle. A generator will not run out and will continue to generate gas and will not need to be disconnected.

Perhaps the most important reason for your analysis is consistent gas purity. A gas generator supplies a constant quality of gas, while the purity of gas from a bottle can differ per bottle. That is undesirable for your instrument and analysis results.

The price of gas cylinders is increasing every year. Gas is becoming more expensive and its supply costs are increasing.

Investing in a gas generator has a payback period of approximately 6 to 12 months. This of course depends on your situation.

Instrument Solutions represents Claind Gas Generators and Purifiers. With over 40 years of experience, their gas generators provide a safer and economical way to supply clean gases. Claind’s generators generate pure Hydrogen (H2), Nitrogen (N2) or pure air (O2) for GC, LC-MS, TOC and many other applications.

If you think that gas generators can replace your gas bottles, but you want to know what is possible for your specific situation, our specialists Sina Saidifar and Jan Volkers can advise you without obligation.

More information about Claind gas generators
© Copyright - Instrument Solutions - website by BlueGlobe