Katanax X-600 X-Fluxer

Katanax X-600 X-Fluxer®

6 position electric Fusion Fluxer

The Katanax X-600 Fluxer from SPEX Europe is the next step in electrical fusion equipment and has been developed with the most demanding laboratory in mind. The X-600 excels in quality, speed and robustness. It features new, improved features that ensure unparalleled results.

The X-600 prepares 6 samples per run and 24 to 30 samples per hour and is used to create glass beads for the XRF and/or solutions for ICP. Changing from glass beads to solutions is quick and easy.

10 unique features

  • The heating elements are inaccessible to flux because they are sealed in a cartridge placed in the back wall;
  • Each element is individually controlled and automatically compensated so that the temperature uniformity per sample is very good. Even after a while there is no drift in temperature;
  • When a heating element breaks down, this is automatically compensated by the other elements, also during the run. It is possible to continue working with the system until the element is replaced;
  • No separate transformer is required. As a result, the X-600 requires less space and makes much less noise;
  • Very short warm-up time of less than 15 minutes;
  • The unit is intrinsically so safe that it does not need a second thermocouple;
  • The holders for Crucibles and Molds are fully ceramic and have no moving parts; therefore no contamination by corrosion of metal parts;
  • Vapours are discharged through 6 ventilation ports, greatly reducing the risk of deposits that can subsequently lead to contamination;
  • The 7.1 inch. Industrial Grade Colour Touchscene with intuitive software uses icons for easy operation;
  • The LED backlight indicates whether the system is warm (red) or cold (blue).

Specifications

Voltage: 205-250 VAC, Single Phase
Frequency: 50-60 Hz
Max power: 4000W
Breaker: is built-in (20A)
Weight 95kg
Dimensions (H x W x D): 56cm x 105cm x 69cm

Contact Form

Would you like to know more about a Solution or Product? Please fill in the form below. We will contact you on working days between 08:30-17:00 within 1 working day.
Thank you in advance.

Name organisation *

Country *

Your name *

E-mail *

Phone number *

Note*

This post is also available in: Dutch