logo_Inorganic_Ventures

Inorganic Ventures has been producing Stock standards, Custom Multi Element standards and Certified Reference Materials (CRMs) since 1985.  These CRM’s are stable, compatible, NIST traceable and are produced and tested according to ISO 17034 & ISO 17025 guidelines.

We flex to your specs

Standards

  • ICP & ICP-MS
  • Single element standards
  • Isotopic standards
  • Speciation standards
  • Multi element standards
  • USP <232>
  • High Purity Ionization Buffers
  • Custom solutions – Inorganic Ventures makes almost every inorganic blend within the scientific boundaries. Whether your 2 or 20 analytes need, milliliters or liters, 0.001µg/ml or 10.000µg/ml, they make it for you.
  • Ion Chromatography
  • Atomic absorption
  • Water QC
  • Law Chemistry
  • A comprehensive reference tool for inorganic analysis is available for download.

Shelf Life Standards up to 4 years

Stock standards of Inorganic Ventures have long had a certified shelf life of one year. Thanks to new technology, it is now possible to store stock standards for ICP-OES, ICP-MS and AAS for up to 4 years without changing the concentration. The shelf life is 4 years when a batch is produced. After opening the TCT bag, an additional year of shelf life is added, making it possible to use the solution for a maximum of four years after production.

Note: the 4-year shelf life starts on the production date and not on the date that you receive the standard. The aim is that stock standards have a shelf life of at least two years when they are delivered to you. With a shelf life of at least one year after opening the TCT bag, the guaranteed shelf life of the delivered solution is therefore still at least two years.

Background; what is transpiration?

Transpiration refers to water vapour that migrates through the wall of the bottle, and/or escapes from the bottle opening. As a result, the concentration of the CRM/RM (Custom Reference Material/Reference Material) in the bottle gradually increases.

The solution

Transpiration Control Technology extends the shelf life of the product by preventing water vapour from escaping from the product even longer. After production, Inorganic Ventures places the bottle in a sealed aluminised TCT bag, which will prevent further loss of water vapour as soon as an equilibrium is reached. Only when the bag is opened can water vapour still escape, and over time this can affect the concentration of elements in the bottle.

It is therefore the same high quality product as you would expect from them, but better packaged.

TCT is an investment made by Inorganic Ventures to enable a much longer shelf life of stock standards. This gives you the advantage of more control over your standards without it costing you extra. The unconditional guarantee on the products remains the same.

What does this mean for you?

All Stock standards you receive are packed in a TCT bag. In the sealed bag, the stock standard has a maximum shelf life of four years from the production date. This shelf life is stated on the TCT bag. After receiving the bag, keep it closed and do not open it until you start using the product. When you open the bag, the standard has an extra shelf life of one year, which means that the product can be used for a maximum of four years after the production date.

Quality

  • ISO 9001 registered
  • ISO 17025 accredited
  • ISO Guide 34 accredited
  • tested by means of validated wet-chemical procedures
  • tested using validated ICP-OES procedurestraces of metal elements are determined by ICP and ICP-MS

Every CRM that comes out of production is provided with a detailed certificate (Certificate of Analysis). The certificates meet the quality requirements of each laboratory:

  • Traceability – to specific NIST SRM and lot
  • Certified values – based on two independent methods
  • Trace impurities – are indicated with actual values
  • Uncertainties – detailed information is provided

Periodic Table Guide

This guide contains more than 70 elements of essential data for each ICP user. Analytical data include chemical compatibility, emission line preferences and the main interferences and detection limits for both ICP and ICP-MS.

Sample Introduction for ICP-MS and ICP-OES

This article discusses the key elements of a Liquid Sample Introduction system for Inductively Coupled Plasma spectroscopy and provides Troubleshooting tips for common problems encountered by analysts.

ICP Operations Guide

This guide is intended for everyone who works with the ICP and prepares samples and standards for it. Topics that come up for order are:

  • Multi Element Standards
  • Sample Introduction
  • Performance Characteristics
  • Calibration Techniques
  • Problem elements
  • Basic Calculations

Contact Form

Would you like to know more about a Solution or Product? Please fill in the form below. We will contact you on working days between 08:30-17:00 within 1 working day.
Thank you in advance.

Name organisation *

Country *

Your name *

E-mail *

Phone number *

Note*

This post is also available in: Dutch